继上一篇介绍Ceph-CSI的RBD对接K8S的文章（K8S使用ceph-csi持久化存储之RBD）后，本篇章介绍了Ceph-CSI的CephFS对接K8S的使用。请食用！
K8S集群：1.17.3+
Ceph集群：Octopus（stables）
Ceph-CSI：release-v3.1
snapshotter-controller：release-2.1
Linue kernel：3.10.0-1127.19.1.el7.x86_64 +
注意：1）CephFS的快照功能需要Ceph版本为O版；2）创建了快照的pvc挂载需要内核4.14版本。
镜像版本：
docker pull quay.io/k8scsi/csi-snapshotter:v2.1.1
docker pull quay.io/k8scsi/csi-snapshotter:v2.1.0
docker pull quay.io/k8scsi/csi-resizer:v0.5.0
docker pull quay.io/k8scsi/csi-provisioner:v1.6.0
docker pull quay.io/k8scsi/csi-node-driver-registrar:v1.3.0
docker pull quay.io/k8scsi/csi-attacher:v2.1.1
docker pull quay.io/cephcsi/cephcsi:v3.1-canary
docker pull quay.io/k8scsi/snapshot-controller:v2.0.1
# git clone https://github.com/ceph/ceph-csi.git
# cd ceph-csi/deploy/cephfs/kubernetes
1.2.1）配置csi-config-map.yaml文件链接ceph集群的信息
# cat csi-config-map.yaml
---
apiVersion: v1
kind: ConfigMap
data:
config.json: |-
[
{
"clusterID": "c7b4xxf7-c61e-4668-9xx0-82c9xx5e3696", // 通过ceph集群的ID
"monitors": [
"xxx.xxx.xxx.xxx:6789"
]
}
]
metadata:
name: ceph-csi-config
1.2.2）部署cephfs相关的CSI
# kubectl apply -f ceph-csi/deploy/cephfs/kubernetes/
# kubectl get pods | grep cephfs
csi-cephfsplugin-8mvmf 3/3 Running 0 2d21h
csi-cephfsplugin-provisioner-78f64778db-42xwc 6/6 Running 0 2d21h
csi-cephfsplugin-provisioner-78f64778db-jzpvd 6/6 Running 0 2d21h
csi-cephfsplugin-provisioner-78f64778db-ntcmd 6/6 Running 0 2d21h
csi-cephfsplugin-zlqzg 3/3 Running 0 2d21h
由于上篇 “K8S使用ceph-csi持久化存储之RBD” 以及部署，这里不需要重复部署。至此，Ceph-CSI和snapshot-controller安装完成。下面进行功能测试。测试功能前需要在ceph集群中创建对应的存储池：
// 查看集群状态
# ceph -s
cluster:
id: c7b43ef7-c61e-4668-9970-82c9775e3696
health: HEALTH_OK
services:
mon: 1 daemons, quorum cka-node-01 (age 24h)
mgr: cka-node-01(active, since 24h), standbys: cka-node-02, cka-node-03
mds: cephfs:1 {0=cka-node-01=up:active} 2 up:standby
osd: 3 osds: 3 up, 3 in
rgw: 1 daemon active (cka-node-01)
task status:
scrub status:
mds.cka-node-01: idle
data:
pools: 7 pools, 184 pgs
objects: 827 objects, 1.7 GiB
usage: 8.1 GiB used, 52 GiB / 60 GiB avail
pgs: 184 active+clean
io:
client: 32 KiB/s rd, 0 B/s wr, 31 op/s rd, 21 op/s wr
// 创建cephfs存储池fs_metadata，fs_data
# ceph osd pool create fs_metadata 8 8
# ceph osd pool create fs_data 8 8
# ceph fs new cephfs fs_metadata fs_data
// 获取集群信息和查看用户key
# ceph mon dump
dumped monmap epoch 3
epoch 3
fsid c7b43ef7-c61e-4668-9970-82c9775e3696
last_changed 2020-09-11 11:05:25.529648
created 2020-09-10 16:22:52.967856
min_mon_release 14 (nautilus)
0: [v2:10.0.xxx.xxx0:3300/0,v1:10.0.xxx.xxx:6789/0] mon.cka-node-01
# ceph auth get client.admin
exported keyring for client.admin
[client.admin]
key = AQBg4llf+9CAGxdsx4tQzS+0OssssiTEQ==
caps mds = "allow *"
caps mgr = "allow *"
caps mon = "allow *"
caps osd = "allow *"
验证如下功能：
1）创建cephfs类型pvc给pod使用；
2）创建cephfs类型pvc的快照，并验证基于快照恢复的可用性（CephFS的快照功能需要Ceph版本为O版）；
3）创建快照后的pvc重复创建挂载（创建了快照的pvc挂载需要内核4.14版本）；
1.1) 创建连接ceph集群的秘钥
# cat secret.yaml
---
apiVersion: v1
kind: Secret
metadata:
name: csi-cephfs-secret
namespace: default
stringData:
# Required for statically provisioned volumes
userID: admin
userKey: AQBg4llf+9CAGdsAds4tQzS+0O7dscB5ZTiTEQ==
# Required for dynamically provisioned volumes
adminID: admin
adminKey: AQBg4llf+9CAGdsAds4tQzS+0O7dscB5ZTiTEQ==
# kubectl apply -f secret.yaml
1.2) 创建storeclass
# cat storageclass.yaml
---
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
name: csi-cephfs-sc
provisioner: cephfs.csi.ceph.com
parameters:
clusterID: c7b43ef7-c61e-4668-9970-82c9775e3696
fsName: cephfs
pool: fs_data
rootPath: /test
csi.storage.k8s.io/provisioner-secret-name: csi-cephfs-secret
csi.storage.k8s.io/provisioner-secret-namespace: default
csi.storage.k8s.io/controller-expand-secret-name: csi-cephfs-secret
csi.storage.k8s.io/controller-expand-secret-namespace: default
csi.storage.k8s.io/node-stage-secret-name: csi-cephfs-secret
csi.storage.k8s.io/node-stage-secret-namespace: default
reclaimPolicy: Delete
allowVolumeExpansion: true
mountOptions:
- discard
# kubectl apply -f storageclass.yaml
1.3)基于storeclass创建pvc
# cat pvc.yaml
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: csi-cephfs-pvc
spec:
accessModes:
- ReadWriteMany
resources:
requests:
storage: 1Gi
storageClassName: csi-cephfs-sc
# kubectl apply -f pvc.yaml
# kubectl get pvc csi-cephfs-pvc
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
csi-cephfs-pvc Bound pvc-72b5c1e0-b2d5-4f93-8779-96cb03efa733 1Gi RWX csi-cephfs-sc 2d21h
1.4）创建pod应用pvc
# cat pod.yaml
---
apiVersion: v1
kind: Pod
metadata:
name: csi-cephfs-demo-pod
spec:
containers:
- name: web-server
image: nginx
volumeMounts:
- name: mypvc
mountPath: /var/lib/www
volumes:
- name: mypvc
persistentVolumeClaim:
claimName: csi-cephfs-pvc
readOnly: false
# kubectl apply -f pod.yaml
# kubectl get pods csi-cephfs-demo-pod
NAME READY STATUS RESTARTS AGE
csi-cephfs-demo-pod 1/1 Running 0 2d21h
# kubectl exec -ti csi-cephfs-demo-pod -- bash
root@csi-cephfs-demo-pod:/# df -h
Filesystem Size Used Avail Use% Mounted on
overlay 199G 7.9G 191G 4% /
tmpfs 64M 0 64M 0% /dev
tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root 199G 7.9G 191G 4% /etc/hosts
shm 64M 0 64M 0% /dev/shm
ceph-fuse 1.0G 0 1.0G 0% /var/lib/www
tmpfs 7.9G 12K 7.9G 1% /run/secrets/kubernetes.io/serviceaccount
tmpfs 7.9G 0 7.9G 0% /proc/acpi
tmpfs 7.9G 0 7.9G 0% /proc/scsi
tmpfs 7.9G 0 7.9G 0% /sys/firmware
# 写入文件，用于后续快照验证
root@csi-cephfs-demo-pod:/# cd /var/lib/www;echo "abce" > test
root@csi-cephfs-demo-pod:/var/lib/www# cat test
abce
2.1)创建上一步pvc的快照
# cat snapshot.yaml
---
apiVersion: snapshot.storage.k8s.io/v1beta1
kind: VolumeSnapshot
metadata:
name: cephfs-pvc-snapshot
spec:
volumeSnapshotClassName: csi-cephfsplugin-snapclass
source:
persistentVolumeClaimName: csi-cephfs-pvc
# kubectl apply -f snapshot.yaml
# kubectl get VolumeSnapshot cephfs-pvc-snapshot
NAME READYTOUSE SOURCEPVC SOURCESNAPSHOTCONTENT RESTORESIZE SNAPSHOTCLASS SNAPSHOTCONTENT CREATIONTIME AGE
cephfs-pvc-snapshot true csi-cephfs-pvc 1Gi csi-cephfsplugin-snapclass snapcontent-6100977b-96e0-43ae-903a-e8136b0f6ced 2d13h 2d21h
2.2)创建基于快照恢复的pvc
# cat pvc-restore.yaml
---
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: cephfs-pvc-restore
spec:
storageClassName: csi-cephfs-sc
dataSource:
name: cephfs-pvc-snapshot
kind: VolumeSnapshot
apiGroup: snapshot.storage.k8s.io
accessModes:
- ReadWriteMany
resources:
requests:
storage: 1Gi
# kubectl apply -f pvc-restore.yaml
2.3)创建pod应用快照恢复的pvc
# cat pod-restore.yaml
---
apiVersion: v1
kind: Pod
metadata:
name: csi-cephfs-restore-demo-pod
spec:
containers:
- name: web-server
image: nginx
volumeMounts:
- name: mypvc
mountPath: /var/lib/www/html
volumes:
- name: mypvc
persistentVolumeClaim:
claimName: cephfs-pvc-restore
readOnly: false
# kubectl apply -f pod-restore.yaml
# kubectl get pods csi-cephfs-restore-demo-pod
NAME READY STATUS RESTARTS AGE
csi-cephfs-restore-demo-pod 1/1 Running 0 2d21h
# kubectl exec -ti csi-cephfs-restore-demo-pod -- bash
root@csi-cephfs-restore-demo-pod:/# df -h
Filesystem Size Used Avail Use% Mounted on
overlay 199G 7.9G 191G 4% /
tmpfs 64M 0 64M 0% /dev
tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/mapper/centos-root 199G 7.9G 191G 4% /etc/hosts
shm 64M 0 64M 0% /dev/shm
ceph-fuse 1.0G 0 1.0G 0% /var/lib/www/html
tmpfs 7.9G 12K 7.9G 1% /run/secrets/kubernetes.io/serviceaccount
tmpfs 7.9G 0 7.9G 0% /proc/acpi
tmpfs 7.9G 0 7.9G 0% /proc/scsi
tmpfs 7.9G 0 7.9G 0% /sys/firmware
root@csi-cephfs-restore-demo-pod:/# cd /var/lib/www/html
root@csi-cephfs-restore-demo-pod:/var/lib/www/html# cat test
abce
//基于快照恢复数据功能正常
3.1)删除csi-cephfs-demo-pod这个pod后重建
# kubectl delete -f pod.yaml
# kubectl apply -f pod.yaml
# kubectl get pods csi-cephfs-demo-pod
NAME READY STATUS RESTARTS AGE
csi-cephfs-demo-pod 0/1 ContainerCreating 0 2d22h
# kubectl describe pods csi-cephfs-demo-pod
...
Events:
Type Reason Age From Message
---- ------ ---- ---- -------
Normal Scheduled default-scheduler Successfully assigned jonathan/csi-rbd-demo-pod to 10.21.xxx.xxx
Normal SuccessfulAttachVolume 25s attachdetach-controller AttachVolume.Attach succeeded for volume "pvc-d6ed5203-36c7-454b-8a8e-b49a084a0531"
Warning FailedMount 0s (x5 over 9s) kubelet, 10.21.xxx.xxx MountVolume.MountDevice failed for volume "pvc-d6ed5203-36c7-454b-8a8e-b49a084a0531" : rpc error: code = Internal desc = rbd: map failed with error an error (exit status 6) occurred while running rbd args: [--id csi -m 10.xxx.xxx.xxx --keyfile=***stripped*** map volumes/csi-vol-9f2dcd03-f97e-11ea-8104-a608005a6960 --device-type krbd], rbd error output: rbd: sysfs write failed
rbd: map failed: (6) No such device or address
3.2）经过分析，该报错是因为node节点的Linux内核版本不支持，需要升级内核。此时的内核版本是3.10版本，升级到4.14版本后问题解决。如下：
# kubectl get node -o wide
NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME
cka-node-01 Ready master 60d v1.17.3 10.0.xxx.xxx CentOS Linux 7 (Core) 4.14.119-200.el7.x86_64 docker://19.3.12
cka-node-02 Ready 60d v1.17.3 10.0.xxx.xxx CentOS Linux 7 (Core) 4.14.119-200.el7.x86_64 docker://19.3.12
cka-node-03 Ready 60d v1.17.3 10.0.xxx.xxx CentOS Linux 7 (Core) 4.14.119-200.el7.x86_64 docker://19.3.12
# kubectl get pods csi-cephfs-demo-pod
NAME READY STATUS RESTARTS AGE
csi-cephfs-demo-pod 1/1 Running 0 2d01h
注意：目前，每个CephFS文件系统限制为400个快照，如果PVC有快照，也无法删除，删除PVC之前，请确保删除PVC上的所有快照。
完
附：欢迎关注本人公众号（内有其他分享）：
京公网安备 11010802041100号 | 京ICP备19059560号-4 | PHP1.CN 第一PHP社区 版权所有