zookeeper集群搭建docker+zk集群搭建

环境:

概念不再阐述，直接上步骤，文章结尾处，会有些常用的zookeeper调优参数

一、准备环境

①拷贝环境

[root@kuting1 ~]# cat /etc/hosts

127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.1.5 zk1
192.168.1.6 zk2
192.168.1.7 zk3


[root@kuting1 ~]# ssh-keygen -t rsa
[root@kuting1 ~]# for i in tail -3 /etc/hosts | awk '{print $2}' ; do ssh-copy-id $i ; done
[root@kuting1 ~]# for i in tail -3 /etc/hosts | awk '{print $2}' ; do scp /etc/hosts $i:/etc/hosts ; done

②下载zookeeper安装包

[root@kuting1 ~]# wget https://archive.apache.org/dist/zookeeper/zookeeper-3.4.11/zookeeper-3.4.11.tar.gz
本次搭建实验使用的zk 3.4.11版本

[root@kuting1 ~]# tar zxf zookeeper-3.4.11.tar.gz
[root@kuting1 ~]# mkdir /data/server -p #程序目录
[root@kuting1 ~]# mkdir /data/data/zookeeper/0{0..2} -p #数据目录
[root@kuting1 ~]# mkdir /data/logs/zookeeper/0{0..2} -p #日志目录

③zookeeper环境必须有java环境以及默认的命令路径，部署过程此次省略

二、搭建单机伪分布式zookeeper集群

环境：

①配置zookeeper00

[root@kuting1 ~]# mv zookeeper-3.4.11 /data/server/zookeeper00
[root@kuting1 ~]# cd /data/server/zookeeper00/conf/
[root@kuting1 conf]# cp zoo_sample.cfg zoo.cfg
[root@kuting1 conf]# vim zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data/data/zookeeper/00
dataLogDir=/data/logs/zookeeper/00
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
autopurge.purgeInterval=48
server.1=192.168.1.5:2888:3888
server.2=192.168.1.5:2889:3889
server.3=192.168.1.5:2890:3890


[root@kuting1 ~]# echo 1 > /data/data/zookeeper/00/myid

②配置zookeeper01

[root@kuting1 ~]# cp -rf /data/server/zookeeper/00 /data/server/zookeeper/01
[root@kuting1 ~]# vim /data/server/zookeeper/01/conf/zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data/data/zookeeper/01 #目录名字
dataLogDir=/data/logs/zookeeper/01
# the port at which the clients will connect
clientPort=2182 #端口号必须要修改
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
autopurge.purgeInterval=48
server.1=192.168.1.5:2888:3888
server.2=192.168.1.5:2889:3889
server.3=192.168.1.5:2890:3890


[root@kuting1 ~]# echo 2 > /data/data/zookeeper/01/myid

③配置zookeeper02

[root@kuting1 ~]# cp -rf /data/server/zookeeper/00 /data/server/zookeeper/02
[root@kuting1 ~]# vim /data/server/zookeeper/02/conf/zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data/data/zookeeper/02
dataLogDir=/data/logs/zookeeper/02
# the port at which the clients will connect
clientPort=2183
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
autopurge.purgeInterval=48
server.1=192.168.1.5:2888:3888
server.2=192.168.1.5:2889:3889
server.3=192.168.1.5:2890:3890


[root@kuting1 ~]# echo 3 > /data/data/zookeeper/02/myid

④测试运作

启动第一个节点
[root@kuting1 ~]# cd /data/server/zookeeper00/bin
[root@kuting1 bin]# ./zkServer.sh start

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper00/bin/../conf/zoo.cfg
Starting zookeeper ... STARTED


[root@kuting1 bin]# ss -anpt | grep java

LISTEN 0 50 :::2181 :::* users:(("java",pid=13285,fd=25))
LISTEN 0 50 :::46475 :::* users:(("java",pid=13285,fd=19))
LISTEN 0 50 ::ffff:192.168.1.5:3888 :::* users:(("java",pid=13285,fd=26))


启动第二个节点
[root@kuting1 bin]# ../../zookeeper01/bin/zkServer.sh start

启动第三个节点
[root@kuting1 bin]# ../../zookeeper02/bin/zkServer.sh start

[root@kuting1 bin]# ss -anpt | grep java

LISTEN 0 50 :::37985 :::* users:(("java",pid=14163,fd=19))
LISTEN 0 50 :::2181 :::* users:(("java",pid=13285,fd=25))
LISTEN 0 50 :::2182 :::* users:(("java",pid=14163,fd=25))
LISTEN 0 50 :::2183 :::* users:(("java",pid=14207,fd=25))
LISTEN 0 50 ::ffff:192.168.1.5:2889 :::* users:(("java",pid=14163,fd=28))
LISTEN 0 50 :::46475 :::* users:(("java",pid=13285,fd=19))
LISTEN 0 50 ::ffff:192.168.1.5:3888 :::* users:(("java",pid=13285,fd=26))
LISTEN 0 50 ::ffff:192.168.1.5:3889 :::* users:(("java",pid=14163,fd=26))
LISTEN 0 50 ::ffff:192.168.1.5:3890 :::* users:(("java",pid=14207,fd=26))
LISTEN 0 50 :::42517 :::* users:(("java",pid=14207,fd=19))
ESTAB 0 0 ::ffff:192.168.1.5:41592 ::ffff:192.168.1.5:3888 users:(("java",pid=14207,fd=27))
ESTAB 0 0 ::ffff:192.168.1.5:38194 ::ffff:192.168.1.5:2889 users:(("java",pid=14207,fd=29))
ESTAB 0 0 ::ffff:192.168.1.5:41080 ::ffff:192.168.1.5:3889 users:(("java",pid=14207,fd=28))
ESTAB 0 0 ::ffff:192.168.1.5:41584 ::ffff:192.168.1.5:3888 users:(("java",pid=14163,fd=27))
ESTAB 0 0 ::ffff:192.168.1.5:3889 ::ffff:192.168.1.5:41080 users:(("java",pid=14163,fd=30))
ESTAB 0 0 ::ffff:192.168.1.5:2889 ::ffff:192.168.1.5:38194 users:(("java",pid=14163,fd=31))
ESTAB 0 0 ::ffff:192.168.1.5:38188 ::ffff:192.168.1.5:2889 users:(("java",pid=13285,fd=28))
ESTAB 0 0 ::ffff:192.168.1.5:2889 ::ffff:192.168.1.5:38188 users:(("java",pid=14163,fd=29))
ESTAB 0 0 ::ffff:192.168.1.5:3888 ::ffff:192.168.1.5:41584 users:(("java",pid=13285,fd=27))
ESTAB 0 0 ::ffff:192.168.1.5:3888 ::ffff:192.168.1.5:41592 users:(("java",pid=13285,fd=29))


⑤测试创建一些znode

登陆到第一个节点，客户端端口为2181，创建znode
[root@kuting1 00]# ./zkCli.sh -server 127.0.0.1:2181
[zk: 127.0.0.1:2181(CONNECTED) 0] ls /
[zookeeper]
[zk: 127.0.0.1:2181(CONNECTED) 1] create /data test-data
Created /data
[zk: 127.0.0.1:2181(CONNECTED) 2] ls /
[zookeeper, data]
[zk: 127.0.0.1:2181(CONNECTED) 3] quit

登陆到第二个节点，客户端端口为2182，查看znode是否同步
[root@kuting1 bin]# ./zkCli.sh -server 127.0.0.1:2182
[zk: 127.0.0.1:2182(CONNECTED) 0] ls /
[zookeeper, data]
[zk: 127.0.0.1:2182(CONNECTED) 1] get /data
test-data #数据是一致的
cZxid = 0x100000002
ctime = Sat Aug 04 18:31:39 CST 2018
mZxid = 0x100000002
mtime = Sat Aug 04 18:31:39 CST 2018
pZxid = 0x100000002
cversion = 0
dataVersion = 0
aclVersion = 0
ephemeralOwner = 0x0
dataLength = 9
numChildren = 0
[zk: 127.0.0.1:2182(CONNECTED) 2] quit

登陆到第三个节点，客户端端口为2183，查看znode是否同步
[root@kuting1 bin]# ./zkCli.sh -server 127.0.0.1:2183
[zk: 127.0.0.1:2183(CONNECTED) 0] ls /
[zookeeper, data]
[zk: 127.0.0.1:2183(CONNECTED) 1] get /data
test-data
cZxid = 0x100000002
ctime = Sat Aug 04 18:31:39 CST 2018
mZxid = 0x100000002
mtime = Sat Aug 04 18:31:39 CST 2018
pZxid = 0x100000002
cversion = 0
dataVersion = 0
aclVersion = 0
ephemeralOwner = 0x0
dataLength = 9
numChildren = 0
[zk: 127.0.0.1:2183(CONNECTED) 2] quit

⑥查看集群状态

查看集群的状态、主从信息需要使用 ./zkServer.sh status 命令，但是多个节点的话，逐个查看有些费劲，所以我们写一个简单的shell脚本来批量执行命令。如下
[root@kuting1 ~]# cat checkzk.sh

#!/bin/bash
n=(0 1 2)
for i in ${n[@]};do
echo $i
/data/server/zookeeper0$i/bin/zkServer.sh status
done


[root@kuting1 ~]# chmod +x checkzk.sh
[root@kuting1 ~]# ./checkzk.sh

0
ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper00/bin/../conf/zoo.cfg
Mode: follower
1
ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper01/bin/../conf/zoo.cfg
Mode: leader
2
ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper02/bin/../conf/zoo.cfg
Mode: follower


看到其中有节点已经当选为follower，数据已经同步，完成了单机伪分布式集群搭建

三、搭建分布式zookeeper集群

①环境准备

在搭建单机版之前已经拷贝过环境，关闭防火墙，三台机器均必须拥有java环境

将单机版删除，保留一个节点拷贝到其他机器
[root@kuting1 ~]# rm -rf /data/server/zookeeper0{1..2}
[root@kuting1 ~]# mv /data/server/zookeeper00/ /data/server/zookeeper

在其他节点上创建/data/server预程序目录、/data/data/zookeeper数据目录、/data/logs/zookeeper程序日志目录
[root@kuting1 ~]# rsync -az /data/server/zookeeper zk2:/data/server/zookeeper
[root@kuting1 ~]# rsync -az /data/server/zookeeper zk3:/data/server/zookeeper

逐个设置变量，添加在/etc/profile尾部，source加载一下

export ZOOKEEPER_HOME=/data/server/zookeeper
export JAVA_HOME=/data/server/java
export PATH=$PATH:/data/server/java/bin:/data/server/zookeeper/bin


②配置zookeeper1

[root@kuting1 ~]# vim /data/server/zookeeper/conf/zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data/data/zookeeper/
dataLogDir=/data/logs/zookeeper/
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
autopurge.purgeInterval=48
server.1=192.168.1.5:2888:3888
server.2=192.168.1.6:2888:3888
server.3=192.168.1.7:2888:3888


默认server.1为master节点
[root@kuting2 ~]# echo 1 > /data/data/zookeeper/myid

③配置zookeeper2

[root@kuting1 ~]# vim /data/server/zookeeper/conf/zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data/data/zookeeper/
dataLogDir=/data/logs/zookeeper/
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
autopurge.purgeInterval=48
server.1=192.168.1.5:2888:3888
server.2=192.168.1.6:2888:3888
server.3=192.168.1.7:2888:3888


[root@kuting2 ~]# echo 2 > /data/data/zookeeper/myid

④配置zookeeper3

[root@kuting1 ~]# vim /data/server/zookeeper/conf/zoo.cfg

# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/data/data/zookeeper/
dataLogDir=/data/logs/zookeeper/
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
autopurge.purgeInterval=48
server.1=192.168.1.5:2888:3888
server.2=192.168.1.6:2888:3888
server.3=192.168.1.7:2888:3888


[root@kuting2 ~]# echo 3 > /data/data/zookeeper/myid

⑤测试启动zookeeper集群

[root@kuting1 conf]# zkServer.sh start
[root@kuting2 conf]# zkServer.sh start
[root@kuting3 conf]# zkServer.sh start

查看三节点的集群状态(在启动之后有节点选举的过程，注意关闭防火墙)
[root@kuting1 zookeeper]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: leader


[root@kuting2 conf]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: follower


[root@kuting3 conf]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: follower


⑥测试创建znode，查看是否同步

[root@kuting3 zookeeper]# zkCli.sh -server 192.168.1.7:2181
[zk: 192.168.1.7:2181(CONNECTED) 0] ls /
[zookeeper]
[zk: 192.168.1.7:2181(CONNECTED) 1] create /real-culster real-data
Created /real-culster
[zk: 192.168.1.7:2181(CONNECTED) 2] ls /
[zookeeper, real-culster]
[zk: 192.168.1.7:2181(CONNECTED) 3] get /real-culster
real-data
cZxid = 0x100000002
ctime = Sat Sep 29 11:09:40 CST 2018
mZxid = 0x100000002
mtime = Sat Sep 29 11:09:40 CST 2018
pZxid = 0x100000002
cversion = 0
dataVersion = 0
aclVersion = 0
ephemeralOwner = 0x0
dataLength = 9
numChildren = 0
[zk: 192.168.1.7:2181(CONNECTED) 4] quit

[root@kuting3 zookeeper]# zkCli.sh -server 192.168.1.5:2181
[zk: 192.168.1.5:2181(CONNECTED) 0] ls /
[zookeeper, real-culster]
[zk: 192.168.1.5:2181(CONNECTED) 1] get /real-culster
real-data
cZxid = 0x100000002
ctime = Sat Sep 29 11:09:40 CST 2018
mZxid = 0x100000002
mtime = Sat Sep 29 11:09:40 CST 2018
pZxid = 0x100000002
cversion = 0
dataVersion = 0
aclVersion = 0
ephemeralOwner = 0x0
dataLength = 9
numChildren = 0
[zk: 192.168.1.5:2181(CONNECTED) 2] quit

[root@kuting3 zookeeper]# zkCli.sh -server 192.168.1.6:2181
[zk: 192.168.1.6:2181(CONNECTED) 0] ls /
[zookeeper, real-culster]
[zk: 192.168.1.6:2181(CONNECTED) 1] get /real-culster
real-data
cZxid = 0x100000002
ctime = Sat Sep 29 11:09:40 CST 2018
mZxid = 0x100000002
mtime = Sat Sep 29 11:09:40 CST 2018
pZxid = 0x100000002
cversion = 0
dataVersion = 0
aclVersion = 0
ephemeralOwner = 0x0
dataLength = 9
numChildren = 0
[zk: 192.168.1.6:2181(CONNECTED) 2] quit

发现两个follower节点已经同步znode

⑦测试集群选举高可用

停止leader节点
[root@kuting1 zookeeper]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: leader


[root@kuting1 zookeeper]# zkServer.sh stop

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Stopping zookeeper ... STOPPED


这时去到follower节点看看有没有被选举到leader
[root@kuting2 ~]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: leader


[root@kuting2 ~]# ip a | grep inet | grep ens33$

inet 192.168.1.6/24 brd 192.168.1.255 scope global noprefixroute ens33

[root@kuting1 conf]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: followe


[root@kuting1 conf]# ip a | grep inet | grep ens33$

inet 192.168.1.5/24 brd 192.168.1.255 scope global noprefixroute ens33

发现已经有follower节点被选举被leader，之后将停掉的zk启动起来
[root@kuting3 zookeeper]# zkServer.sh start
[root@kuting3 zookeeper]# zkServer.sh status

ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: follower


发现他不会成为leader，而是扮演follower角色

[root@kuting2 ~]# zkServer.sh status
ZooKeeper JMX enabled by default
Using config: /data/server/zookeeper/bin/../conf/zoo.cfg
Mode: leader


leader角色没有改变，所以只有在选举的时候集群中的节点才会切换角色

四、使用docker搭建zookeeper集群

①下载docker以及docker-compose工具

②配置docker-compose.yml文件搭建zk集群

[root@kuting1 ~]# docker pull zookeeper
[root@kuting1 ~]# mkdir -p /data/docker/docker-compose/zookeeper-cluster
[root@kuting1 ~]# cd $!
[root@kuting1 zookeeper-cluster]# vim docker-compose.yml

version: '2'
services:
zoo1:
image: zookeeper
restart: always
container_name: zk1
ports:
- "2181:2181"
environment:
ZOO_MY_ID: 1
ZOO_SERVERS: server.1=zk1:2888:3888 server.2=zk2:2888:3888 server.3=zk3:2888:3888
zk2:
image: zookeeper
restart: always
container_name: zk2
ports:
- "2182:2181"
environment:
ZOO_MY_ID: 2
ZOO_SERVERS: server.1=zk1:2888:3888 server.2=zk2:2888:3888 server.3=zk3:2888:3888
zk3:
image: zookeeper
restart: always
container_name: zk3
ports:
- "2183:2181"
environment:
ZOO_MY_ID: 3
ZOO_SERVERS: server.1=zk1:2888:3888 server.2=zk2:2888:3888 server.3=zk3:2888:3888


[root@kuting1 zookeeper-cluster]# docker-compose up -d
[root@kuting1 zookeeper-cluster]# docker-compose ps

Name Command State Ports
------------------------------------------------------------------------------------------
zk1 /docker-entrypoint.sh zkSe ... Up 0.0.0.0:2181->2181/tcp, 2888/tcp, 3888/tcp
zk2 /docker-entrypoint.sh zkSe ... Up 0.0.0.0:2182->2181/tcp, 2888/tcp, 3888/tcp
zk3 /docker-entrypoint.sh zkSe ... Up 0.0.0.0:2183->2181/tcp, 2888/tcp, 3888/tcp


③检查zookeeper集群状态

[root@kuting1 zookeeper-cluster]# echo stat | nc 127.0.0.1 2182

Zookeeper version: 3.4.13-2d71af4dbe22557fda74f9a9b4309b15a7487f03, built on 06/29/2018 04:05 GMT
Clients:
/172.18.0.1:40116[0](queued=0,recved=1,sent=0)
Latency min/avg/max: 0/0/0
Received: 1
Sent: 0
Connections: 1
Outstanding: 0
Zxid: 0x100000002
Mode: follower
Node count: 4


[root@kuting1 zookeeper-cluster]# echo stat | nc 127.0.0.1 2181

Zookeeper version: 3.4.13-2d71af4dbe22557fda74f9a9b4309b15a7487f03, built on 06/29/2018 04:05 GMT
Clients:
/172.18.0.1:55510[0](queued=0,recved=1,sent=0)
Latency min/avg/max: 0/33/66
Received: 3
Sent: 2
Connections: 1
Outstanding: 0
Zxid: 0x100000002
Mode: follower
Node count: 4


[root@kuting1 zookeeper-cluster]# echo stat | nc 127.0.0.1 2183

Zookeeper version: 3.4.13-2d71af4dbe22557fda74f9a9b4309b15a7487f03, built on 06/29/2018 04:05 GMT
Clients:
/172.18.0.1:34678[0](queued=0,recved=1,sent=0)
Latency min/avg/max: 0/0/0
Received: 1
Sent: 0
Connections: 1
Outstanding: 0
Zxid: 0x100000002
Mode: leader
Node count: 4
Proposal sizes last/min/max: 32/32/36


④检查znode数据同步

[root@kuting1 ~]# zkCli.sh -server 127.0.0.1:2181 #2181端口为zk1，根据yml文件中的映射关系依次类推
[zk: 127.0.0.1:2181(CONNECTED) 3] create /data test-data
[root@kuting1 ~]# zkCli.sh -server 127.0.0.1:2182
[zk: 127.0.0.1:2182(CONNECTED) 0] ls /
[zookeeper, data]
[root@kuting1 ~]# zkCli.sh -server 127.0.0.1:2183
[zk: 127.0.0.1:2183(CONNECTED) 0] ls /
[zookeeper, data]

发现集群状态与数据都已经正常，搭建完毕

五、关于常用的zookeeper优化

①
tickTime:CS通信心跳数，Zookeeper 服务器之间或客户端与服务器之间维持心跳的时间间隔，也就是每个 tickTime时间就会发送一个心跳。tickTime以毫秒为单位。该参数用来定义心跳的间隔时间，zookeeper的客户端和服务端之间也有和web开发里类似的session的概念，而zookeeper里最小的session过期时间就是tickTime的两倍

②initLimit：LF初始通信时限，集群中的follower服务器(F)与leader服务器(L)之间 初始连接时能容忍的最多心跳数（tickTime的数量）。此配置表示，允许 follower （相对于 leader 而言的“客户端”）连接 并同步到leader 的初始化连接时间，它以 tickTime 的倍数来表示。当超过设置倍数的 tickTime 时间，则连接失败

③syncLimit：LF同步通信时限，集群中的follower服务器(F)与leader服务器(L)之间 请求和应答之间能容忍的最多心跳数（tickTime的数量）。此配置表示， leader 与 follower 之间发送消息，请求 和 应答时间长度。如果 follower 在设置的时间内不能与leader 进行通信，那么此 follower 将被丢弃

④4lw.commands.whitelist：命令的白名单，没有在的会禁止。4lw.commands.whitelist=stat,ruok, conf, isro

⑤服务器名称与地址：集群信息（服务器编号，服务器地址，LF通信端口，选举端口）

⑥这个配置项的书写格式比较特殊，规则如下：
server.N=YYY:A:B
server.1=itcast05:2888:3888
server.2=itcast06:2888:3888
server.3=itcast07:2888:3888