如何自行编译ESP8266ESPEasy固件

有些东西总是要看看&＃xff0c;要改改 想动动。。。

这个怎么动&＃xff1f;

arduino标准环境&＃xff1f;这个没搞定。。。。。

然后方法有二&＃xff1a;

1。GIT 下源码后  /ESPEasy/tools/ 下有个 build_ESPeasy.sh 可以运行它。。。它会自己去下需要的各种编译插件&＃xff0c;总之 凑合可以完成编译

2。使用VS CODE 安装  PlatformIO 的插件

这样好用一些

然后改改  ESPEasy/platformio.ini 把里面那些自己用不着的开发板都删除一下&＃xff0c;否则每次都有全编译 时间太长

要想启用ESPEasy里那些测试的插件&＃xff0c;需要修改

ESPEasy/src/ESPEasy-Globals.h

按照说明把前面的//去掉&＃xff0c;默认只有 NORMAL 的 &＃xff0c;后面那些一个不如一个靠谱&＃xff0c;谨慎使用

//Select which plugin sets you want to build.
//These are normally automaticly set via the Platformio build environment.
//If you use ArduinoIDE you might need to uncomment some of them, depending on your needs
//If you dont select any, a version with a minimal number of plugins will be biult for 512k versions.
//(512k is NOT finsihed or tested yet as of v2.0.0-dev6)//build all the normal stable plugins (on by default)#define PLUGIN_BUILD_NORMAL//build all plugins that are in test stadium#define PLUGIN_BUILD_TESTING//build all plugins that still are being developed and are broken or incomplete
#define PLUGIN_BUILD_DEV//add this if you want SD support (add 10k flash)
//#define FEATURE_SD