CSE230Project4:PardontheInterruption

CSE 230 Project 4: Pardon the Interruption
Learning Objectives:
● Implement an interrupt service routine in a program containing existing functionality
The Task
In this project, you will be adding an interrupt service routine (ISR) to an existing program. The program is
already fully functional hexadecimal counter that shows the current counter value on the seven-segment
display. You will use the timer to generate an interrupt every x cycles (where x can be between 100 and 200
cycles). Your ISR needs to do the following things:
1. Toggle all eight LEDs (i.e. if they are all off, they should all be turned on and if they are already on, turn
them off)
2. Perform any tasks necessary to allow another timer interrupt within 100 to 200 cycles
No changes should be made to the existing main loop or sseg_display.asm. Code should only be added following
the TODO comments.
Deliverables:
1. Take the Project 4 Pre Quiz (3 points)
2. Submit your program on Canvas with the format: Firstname_Lastname_project4.plp (12 points)
3. Take the Project 4 Post Quiz (2 points)

因为专业，所以值得信赖。如有需要，请加QQ：99515681 或邮箱：99515681@qq.com 

微信：codinghelp