SQLyog客户端无法连接MySQL服务器案例分析

--查看客户端ip [root@mysql ~]# w 22:20:43 up 2:39, 1 user, load average: 0.00, 0.01, 0.05 USER TTY FROM

--查看客户端ip

[root@mysql ~]# w

22:20:43 up 2:39, 1 user, load average: 0.00, 0.01, 0.05

USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT

root pts/1 192.168.1.7 21:35 3.00s 0.07s 0.01s w

--创建客户端用户

root@localhost 22:23:15[(none)]> create user 'zlm'@'192.168.1.7' identified by 'zlm';

Query OK, 0 rows affected (0.00 sec)

--用新创建的用户通过SQLyog客户端连接服务器

提示无法连接，"Can't connect to MySQL server"

--创建服务器上的本地账户

root@localhost 22:34:26[(none)]> create user 'zlm'@'192.168.1.11' identified by 'zlm';

Query OK, 0 rows affected (0.00 sec)

root@localhost 22:34:29[(none)]> exit

Bye

--测试是否可以连接

[root@mysql ~]# mysql --protocol=tcp -P 3306 -h192.168.1.11 -uzlm -pzlm

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 19

Server version: 5.5.39-log MySQL Community Server (GPL)

Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

zlm@192.168.1.11 22:44:52[(none)]> exit

Bye

[root@mysql ~]# netstat -nalp | grep "3306"

tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 3645/mysqld

tcp 0 0 192.168.1.11:3306 192.168.1.7:59783 ESTABLISHED 3645/mysqld

tcp 0 0 192.168.1.11:3306 192.168.1.7:59779 ESTABLISHED 3645/mysqld

[root@mysql ~]# netstat -nalp|grep "3306"|awk '{print $5}'|awk -F: '{print $1}'|sort |uniq -c|sort -nr

2 192.168.1.7
1 0.0.0.0

[root@mysql ~]#

本地用户可以用3306端口连接，说明网络没有问题，3306端口也开启着，其实问题还是出在iptables

刚才用chkconfig iptables off来关闭各终端的iptables需要重启后才生效，此时并未重启过

[root@mysql ~]# chkconfig iptables --list

iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off

[root@mysql ~]# chkconfig iptables off

[root@mysql ~]# chkconfig iptables --list

iptables 0:off 1:off 2:off 3:off 4:off 5:off 6:off

--不重启直接关闭iptables服务

[root@mysql ~]# /etc/init.d/iptables stop

iptables: Setting chains to policy ACCEPT: filter [ OK ]

iptables: Flushing firewall rules: [ OK ]

iptables: Unloading modules: [ OK ]

[root@mysql ~]# /etc/init.d/iptables status

iptables: Firewall is not running.

--关闭iptables后，，再次连接成功

如果不想关iptables也可以，把-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT添加到/etc/sysconfig/iptables即可

--在iptables中添加允许规则(注意不是添加在最后)

[root@mysql ~]# vim /etc/sysconfig/iptables

# Firewall configuration written by system-config-firewall

# Manual customization of this file is not recommended.

*filter

:INPUT ACCEPT [0:0]

:FORWARD ACCEPT [0:0]

:OUTPUT ACCEPT [0:0]

-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

-A INPUT -p icmp -j ACCEPT

-A INPUT -i lo -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT --表示允许3306端口通过防火墙

-A INPUT -j REJECT --reject-with icmp-host-prohibited

-A FORWARD -j REJECT --reject-with icmp-host-prohibited

COMMIT

--改完后重启iptables

[root@mysql ~]# /etc/init.d/iptables restart

iptables: Setting chains to policy ACCEPT: filter [ OK ]

iptables: Flushing firewall rules: [ OK ]

iptables: Unloading modules: [ OK ]

iptables: Applying firewall rules: [ OK ]

这次再通过SQLyog客户端连接MySQL服务器，依然成功连接！可见，之前无法连接的问题就是因为3306被防火墙给阻挡了。

CentOS 6.3 安装MySQL与SQLyog连接

Ubuntu 14.04下安装MySQL

《MySQL权威指南(原书第2版)》清晰中文扫描版 PDF

Ubuntu 14.04 LTS 安装 LNMP Nginx\PHP5 (PHP-FPM)\MySQL

Ubuntu 14.04下搭建MySQL主从服务器

Ubuntu 12.04 LTS 构建高可用分布式 MySQL 集群

Ubuntu 12.04下源代码安装MySQL5.6以及Python-MySQLdb

MySQL-5.5.38通用二进制安装