作者:混迹潘_442 | 来源:互联网 | 2018-03-21 18:35
本文章来讲述一下关于mvc中controller类教程,通过上两节我们知道程序通过单一入口文件的route类决定了唯一的moudle,conttoller,action,并在最后执行了实...
本文章来讲述一下关于mvc中controller类教程,通过上两节我们知道 程序通过单一入口文件的route类决定了 唯一的moudle, conttoller, action,并在最后执行了
实例代码如下:
run();
/**
* 执行相应的 MCA
*
*/
private function run() {
$filePath = APPLICATION_PATH . '/controller/' . $this->_moudle . '/' . $this->_conttoller . '.inc.php';
$isNo = 0;
if (file_exists($filePath)) {
include "$filePath";
$controller_tp = $this->_conttoller . 'Controller';
$cOntroller= new $controller_tp;
if (method_exists($controller, $this->_action . 'Action')) {
$acion_tmp = $this->_action . 'Action';
$controller->$acion_tmp();
} else {
$isNo = 1;
}
} else {
$isNo = 1;
}
if ($isNo) {
$filePath = APPLICATION_PATH . '/controller/default/index.inc.php';
$this->_moudle = $this->_default['module'];
$this->_cOnttoller= $this->_default['conttoller'];
$this->_action = $this->_default['action'];
($this->_moudle != $this->_default['module']) && include "$filePath";
$cOntroller= new indexController;
$controller->indexAction();
}
}
?>
当相关'Controller'文件存在时执行
实例代码如下:
include "$filePath";
$controller_tp = $this->_conttoller.'Controller';
$cOntroller= new $controller_tp;
上述三行代码的意思是,根据确定好的 conttoller 包含相应文件,并实例化相应的conttoller.
实例代码如下:
$acion_tmp = $this->_action.'Action';
$controller->$acion_tmp();
根据相应的Action 执行相应的action
所有的 Controller 类都集成一个公用的Controller 类,本节课我们就来分析一下公共的Controller 类
init();
}
/*
* 初始化变量,顶部菜单和模板
*/
protected function init() {
global $TPL, $route;
$this->tpl = $TPL;
$this->_route = $route;
}
/**
* 模板变量传第
*/
protected function diplayTpl() {
$this->body || $this->body = $this->_route->getActionName();
$this->tpl->assign("body", $this->body);
/*设置本控制器的模板目录*/
$this->controller || $this->cOntroller= $this->_route->getControllerName();
$this->tpl->assign("controller", $this->controller);
$this->tpl->display($this->layout);
}
/**
* smarty封装类
* @param string $name
* @param string $value
*/
public function assign($name, $value) {
$this->tpl->assign($name, $value);
}
/**
* 显示另外的模板
* @param string $name
* @param string $value
*/
protected function displayOther($file) {
$this->assign("otherTpl", TRUE);
$this->tpl->display($file);
}
/**
* 显示某个MCA的body模板
* 0=>m 1=>c =>a
*/
protected function getMcaBody($array) {
return 'http://www.cnblogs.com/../' . $array[0] . '/body/' . $array[1] . '/' . $array[2];
}
/*
* 析构函数,显示页面
*/
protected function __destruct() {
$this->tpl->_tpl_vars['otherTpl'] || $this->diplayTpl();
}
/**
* 中途退出
*/
protected function _exit($msg = "") {
$this->assign("otherTpl", TRUE);
die($msg);
}
/**
* 用 $this->html_var=value放法给变量赋值
* 用 $this->tpl_var=value放法给变量赋值
*/
protected function __set($name, $value) {
if (strtolower(substr($name, 0, 5)) == "html_" || strtolower(substr($name, 0, 4)) == "tpl_") {
$this->assign(substr($name, 5) , $value);
}
}
}
?>
实例代码如下:
protected function __destruct()
{
$this->tpl->_tpl_vars['otherTpl'] || $this->diplayTpl();
}
这是所有Controller 类 生命周期结束时候要执行的函数(搜索一下php魔术方法 查看详情)
本框架利用这时候解析模板,这样的好处是,当Controller中相关执行完相关数据处理,后自动执行相关的模板(View);而不用每次在程序最后调用模板
实例代码如下:
protected function __set($name, $value) {
if (strtolower(substr($name, 0, 5)) == "html_" || strtolower(substr($name, 0, 4)) == "tpl_") {
$this->assign(substr($name, 5) , $value);
}
}
这个函数简化了程序向模板传递变量的方法,以smarty为例,在程序中需要执行 $tpl->assign('key',$value);
来向模板中注册变量,而此函数中简化了此方法 ,只需 $this->html_key=$value;来实现相同的作用.(利用开发环境的提示功能,在前面声明
实例代码如下:
public $html_;
public $tpl_;
永久地址:
转载随意~请带上教程地址吧^^