minikube安装过程附带报错解决办法

介绍

minikube

Minikube 是一个可以在本地轻松运行 Kubernetes 的工具。Minikube 会在您的笔记本电脑中的虚拟机上运行一个单节点的 Kubernetes 集群，以便用户对 Kubernetes 进行试用或者在之上进行 Kubernetes 的日常开发。

kubectl

kubectl是用于针对Kubernetes集群运行命令的命令行接口。

安装

环境

安装环境：parallels 虚拟机
操作系统：centos 7 minimal

过程

环境初始化

初始化所需要执行的命令，都是根据在安装过程中遇到的报错，给出的解决办法整理。

# 安装docker服务
sudo yum install docker
# 启用docker服务
sudo systemctl enable docker.service
# 关闭防火墙
sudo systemctl stop firewalld
# 关闭内存交换
sudo swapoff -a
# 修改文件驱动
sudo vi /lib/systemd/system/docker.service
# 修改为cgroupfs
--exec-opt native.cgroupdriver=cgroupfs
# 重新加载配置
systemctl daemon-reload
# 重启docker
systemctl restart docker
# 关闭selinux
sudo setenforce 0
# 文件权限
sudo chmod -R 777 /etc/kubernetes/addons/
# 启动kubelet服务，注意：可能需要第一次允许minikube start后才会拉取kubelet
systemctl enable kubelet.service


启动minikube

If you are running within a VM, your hypervisor does not allow nested virtualization. You will need to use the None (bare-metal) driver

因为服务本身已经安装在vm虚拟机上，所以这里使用--vm-driver=none裸机运行

sudo minikube start --vm-driver=none

开启 minikube dashboard

仪表板是基于Web的Kubernetes用户界面。您可以使用仪表板将容器化的应用程序部署到Kubernetes集群，对容器化的应用程序进行故障排除以及管理集群资源。您可以使用Dashboard来概述集群上运行的应用程序，以及创建或修改单个Kubernetes资源（例如Deployments，Jobs，DaemonSets等）。例如，您可以使用部署向导来扩展部署，启动滚动更新，重新启动Pod或部署新应用程序。

仪表板还提供有关集群中Kubernetes资源状态以及可能发生的任何错误的信息。

如果是直接安装在macOS上，可以使用minikube dashboard

$ sudo minikube dashboard
&＃x1f914; Verifying dashboard health ...
&＃x1f680; Launching proxy ...
&＃x1f914; Verifying proxy health ...
http://127.0.0.1:46727/api/v1/namespaces/kubernetes-dashboard/services/http:kubernetes-dashboard:/proxy/
#### 宿主机浏览器访问

因为我们使用的是centos 7 minimal只有终端环境，所以我们要在宿主机上进行浏览器访问，不需要执行minikube dashboard，使用如下命令开启proxy

sudo kubectl proxy --address='0.0.0.0' --accept-hosts='^*$'


并且使用如下地址访问即可

http://xxx.xxx.xxx.xxx:8001/api/v1/namespaces/kubernetes-dashboard/services/http:kubernetes-dashboard:/proxy

IP获取

要获取xxx.xxx.xxx.xxx的虚拟机ip，可以使用如下命令。

sudo minikube ip

参考资料

《WEB UI (Dashboard)》

《minikube linux installation》

《安装并设置 kubectl》

《通过 Minikube 在本地运行 Kubernetes》

报错+解决方案

问题

sudo minikube start --vm-driver=none
sudo: minikube：找不到命令

解决办法
将/usr/local/bin添加到secure_path后面，保存后立即生效

su root
vi /etc/sudoers
Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin


问题

Unable to start VM: create: precreate: exec: "docker": executable file not found in $PATH

解决办法

sudo yum install docker

问题

&＃x1f4a3; Error starting cluster: cmd failed: sudo env PATH=/var/lib/minikube/binaries/v1.16.0:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap
: running command: sudo env PATH=/var/lib/minikube/binaries/v1.16.0:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap
output: [init] Using Kubernetes version: v1.16.0
[preflight] Running pre-flight checks
[WARNING Firewalld]: firewalld is active, please ensure ports [8443 10250] are open or your cluster may not function correctly
[WARNING Service-Docker]: docker service is not enabled, please run 'systemctl enable docker.service'
[WARNING Swap]: running with swap on is not supported. Please disable swap
[WARNING FileExisting-socat]: socat not found in system path
[WARNING Hostname]: hostname "minikube" could not be reached
[WARNING Hostname]: hostname "minikube": lookup minikube on 10.211.55.1:53: no such host
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR FileContent--proc-sys-net-bridge-bridge-nf-call-iptables]: /proc/sys/net/bridge/bridge-nf-call-iptables contents are not set to 1
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
To see the stack trace of this error execute with --v=5 or higher
: running command: sudo env PATH=/var/lib/minikube/binaries/v1.16.0:$PATH kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap
.: exit status 1
&＃x1f63f; Sorry that minikube crashed. If this was unexpected, we would love to hear from you:
&＃x1f449; https://github.com/kubernetes/minikube/issues/new/choose

解决办法

systemctl stop firewalld
swapoff -a
systemctl enable docker.service
systemctl enable kubelet.service

问题

failed to run Kubelet: failed to create kubelet: misconfiguration: kubelet cgroup driver: "cgroupfs" is different from docker cgroup driver: "systemd"

解决办法

vi /lib/systemd/system/docker.service
修改为cgroupfs
systemctl daemon-reload
systemctl restart docker

问题

&＃x274c; Problems detected in kube-addon-manager [13ce287ce3f6]:
error: Error loading config file "/var/lib/minikube/kubeconfig": open /var/lib/minikube/kubeconfig: permission denied
error: Error loading config file "/var/lib/minikube/kubeconfig": open /var/lib/minikube/kubeconfig: permission denied
error: Error loading config file "/var/lib/minikube/kubeconfig": open /var/lib/minikube/kubeconfig: permission denied


解决办法

setenforce 0

问题

minikube dashboard
&＃x1f50c; Enabling dashboard ...
&＃x1f4a3; Unable to enable dashboard: [enabling addon deploy/addons/dashboard/dashboard-clusterrole.yaml: error creating file at /etc/kubernetes/addons/dashboard-clusterrole.yaml: open /etc/kubernetes/addons/dashboard-clusterrole.yaml: permission denied]

解决办法

sudo chmod -R 777 /etc/kubernetes/addons/

问题

kubectl proxy --address='0.0.0.0' --accept-hosts='^*$'
Starting to serve on [::]:8001
2019/09/23 18:22:52 http: proxy error: dial tcp [::1]:8080: connect: connection refused
2019/09/23 18:22:53 http: proxy error: dial tcp [::1]:8080: connect: connection refused
2019/09/23 18:22:53 http: proxy error: dial tcp [::1]:8080: connect: connection refused

解决办法
kubectl +sudo执行

sudo kubectl proxy --address='0.0.0.0' --accept-hosts='^*$'