centos系统默认给装的是python2.4，于是先把python升到2.7.5吧。参考的：http://gavinshaw.blog.51cto.com/385947/610585下载新版本的python1:[root@wangyuelou~]#wgethttp://python.org/ftp/python/2.7.2/Pytho
centos系统默认给装的是python 2.4，于是先把python升到2.7.5吧。
参考的：http://gavinshaw.blog.51cto.com/385947/610585
下载新版本的python
1: [root@wangyuelou ~]# wget http://python.org/ftp/python/2.7.2/Python-2.7.2.tgz
解压缩 以及编译
1: [root@wangyuelou ~]# tar xvf Python-2.7.2.tar.bz2
2: [root@wangyuelou Python-2.7.2]# ./configure --prefix=/usr/local/python27
3: [root@wangyuelou Python-2.7.2]# make
4: [root@wangyuelou Python-2.7.2]# make install
5: [root@wangyuelou Python-2.7.2]# ls /usr/local/python27/ -al
6: total 28
7: drwxr-xr-x 6 root root 4096 Jul 14 00:21 .
8: drwxr-xr-x 20 root root 4096 Jul 14 00:17 ..
9: drwxr-xr-x 2 root root 4096 Jul 14 00:21 bin
10: drwxr-xr-x 3 root root 4096 Jul 14 00:21 include
11: drwxr-xr-x 4 root root 4096 Jul 14 00:21 lib
12: drwxr-xr-x 3 root root 4096 Jul 14 00:21 share
覆盖原来的python链接
1: [root@wangyuelou Python-2.7.2]# mv /usr/bin/python /usr/bin/python_old
2: [root@wangyuelou Python-2.7.2]# ln -s /usr/local/python27/bin/python /usr/bin/
3: [root@wangyuelou Python-2.7.2]# python
4: Python 2.7.2 (default, Jul 14 2011, 00:20:14)
5: [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2
6: Type "help", "copyright", "credits" or "license" for more information.
7: >>>
此处已经可以正常使用python2.7了
但是因为yum是使用的2.4的版本来用的，所以 还需要修改一下
1: [root@wangyuelou ~]# yum
2: There was a problem importing one of the Python modules
3: required to run yum. The error leading to this problem was:
4:
5: No module named yum
6:
7: Please install a package which provides this module, or
8: verify that the module is installed correctly.
9:
10: It's possible that the above module doesn't match the
11: current version of Python, which is:
12: 2.7.2 (default, Jul 14 2011, 00:20:14)
13: [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)]
14:
15: If you cannot solve this problem yourself, please go to
16: the yum faq at:
17: http://wiki.linux.duke.edu/YumFaq
18:
19:
20: [root@wangyuelou Python-2.7.2]# vim /usr/bin/yum
21:
22: #!/usr/bin/python #修改此处为2.4的位置
23: [root@wangyuelou ~]# vim /usr/bin/yum
24:
25: #!/usr/bin/python2.4
26: [root@wangyuelou ~]# yum
27: Loaded plugins: fastestmirror
28: You need to give some command
29: usage: yum [options] COMMAND
30:
31: List of Commands:
32:
33: check-update Check for available package updates
34: clean Remove cached data
35: deplist List a package's dependencies
36: downgrade downgrade a package
37: erase Remove a package or packages from your system
38: groupinfo Display details about a package group
39: groupinstall Install the packages in a group on your system
40: grouplist List available package groups
41: groupremove Remove the packages in a group from your system
42: help Display a helpful usage message
43: info Display details about a package or group of packages
44: install Install a package or packages on your system
45: list List a package or groups of packages
46: localinstall Install a local RPM
yum 又可以使用了
补充点：
看来新装的版本生效了，做个软连接应该就OK。
mv /usr/bin/python /usr/bin/python-bak
ln -s /usr/local/bin/python3.0 /usr/bin/python
升级安装好以后yum会无法使用，因为yum使用的是2.4版本的，所以要修改yum的配置文件以便能够识别2.4版本下的python
vim /usr/bin/yum
将文件头部的
#!/usr/bin/python
改成
#!/usr/bin/python2.4
就可以继续使用yum了
![Ubuntu 9.04中安装谷歌Chromium浏览器及使用体验[图文]](https://img1.php1.cn/3cd4a/24bf4/61b/c175cc0fe1277527.jpeg)
京公网安备 11010802041100号